|
|
Build Your Online Product Catalogs?
Stainless steel shot production standards:
We strictly according to Japan JIS standard production stainless steel wire ingredients to production of sandblasting, peen-forming cleaning with stainless steel pill.
The specification of stainless steel shot:
0.6mm 0.5mm 0.4mm 0.3mm 0.2mm(304,430,410£¬202£¬205)
¡¡Stainless steel shot, with its main technical indices:
Product Stainless steel shot
Chemical composition (C) 304 austenitic size (304 Austenite Type) : carbon (C) < 0.15%, chromium (Cr) = 16 ~ 18%, Ni (Ni) = 6 ~ 10%, silicon (Si) < 1%,manganese (Mn) < 2%,
430 Type ferritic (430 Ferrite Type) : carbon (C) < 0.15%, chromium (Cr) = 16 ~ 18%, silicon (Si) < 1%, manganese (Mn) < 1%,
410 Type Martensite (410 Martensite Type) : carbon (C) < 0.15%, chromium (Cr) = 11 ~ 13%, silicon (Si) < 1%, manganese (Mn) < 1%
Note: according to can be based on user needs, providing other chemical composition
(Mn)
(Si)
¡¡(Cr)
¡¡(Ni)
(S)
(P)
Average hardness
(500g load were ***ermined under) 41~59HRC(388~509HV)
Hardness deviation Maximum deviation scope for + 1.0 HRC or + 40HV
Microstructure ¡¡¡¡Longitudinal (Deformed Pearlite)
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡horizontally (Deformed Pearlite)
Density 7.8/cm3
¡¡¡¡Note: according to user requirement, offer other chemical composition.
&©|61548; 304 austenitic size (304 Austenite Type) : carbon (C) < 0.25%, chromium (Cr) = 16 ~ 18%, Ni (Ni) = 6 ~ 10%, silicon (Si) < 1%,
Manganese (Mn) < 2%
&©|61548; 430 Type ferritic (430 Ferrite Type) : carbon (C) < 0.25%, chromium (Cr) = 16 ~ 18%, silicon (Si) < 1%, manganese (Mn) < 1%
&©|61548; 410 Type Martensite (410 Martensite Type) : carbon (C) < 0.25%, chromium (Cr) = 11 ~ 13%, silicon (Si) < 1%, manganese (Mn) < 1%
Stainless steel shot of application:
Stainless steel shot blast cleaning: peen-forming cleaning, body.they, non-ferrous alloy, copper alloy, magnesium alloy, zinc alloy die casting cleaning, stainless steel castings peen-forming cleaning, stainless steel forgings peen-forming cleaning |
| Company: |
Shandong Kaitai Shot-Blasting Machinery CO.,LTD
|
| Contact: |
Ms. xiaoqi zhang |
| Address: |
Qingyang |
| Postcode: |
256217 |
| Tel: |
86 0543 8190669 |
| Fax: |
86 0543 4579617 |
| E-mail: |
|
|
|
|
Home
