|
|
Build Your Online Product Catalogs?
Stainless steel cut wire shot production standards:
We strictly according to Japan JIS standard production stainless steel wire ingredients to production.
The specification of stainless steel cut wire shot:
0.6mm 0.5mm 0.4mm 0.3mm 0.2mm(304,430,410,202)
¡¡Stainless steel cut wire shot, with its main technical indices:
Product Stainless steel shot
Chemical composition £¨C£© 304 austenitic size (304 Austenite Type) : carbon (C) < 0.15%, chromium (Cr) = 16 ~ 18%, Ni (Ni) = 6 ~ 10%, silicon (Si) < 1%,manganese (Mn) < 2%,
430 Type ferritic (430 Ferrite Type) : carbon (C) < 0.15%, chromium (Cr) = 16 ~ 18%, silicon (Si) < 1%, manganese (Mn) < 1%,
410 Type Martensite (410 Martensite Type) : carbon (C) < 0.15%, chromium (Cr) = 11 ~ 13%, silicon (Si) < 1%, manganese (Mn) < 1%
Note: according to can be based on user needs, providing other chemical composition
£¨Mn£©
£¨£Ói£©
¡¡(Cr)
¡¡(Ni)
£¨S£©
£¨P£©
Average hardness
(500g load were ***ermined under) 41¡«59HRC(388¡«509HV)
Hardness deviation Maximum deviation scope for + 1.0 HRC or + 40HV
Microstructure ¡¡¡¡Longitudinal (Deformed Pearlite)
¡¡¡¡horizontally (Deformed Pearlite)
Density 7.8/cm3
Note: according to user requirement, offer other chemical composition.
&©|61548; 304 austenitic size (304 Austenite Type) : carbon (C) < 0.25%, chromium (Cr) = 16 ~ 18%, Ni (Ni) = 6 ~ 10%, silicon (Si) < 1%,
Manganese (Mn) < 2%
&©|61548; 430 Type ferritic (430 Ferrite Type) : carbon (C) < 0.25%, chromium (Cr) = 16 ~ 18%, silicon (Si) < 1%, manganese (Mn) < 1%
&©|61548; 410 Type Martensite (410 Martensite Type) : carbon (C) < 0.25%, chromium (Cr) = 11 ~ 13%, silicon (Si) < 1%, manganese (Mn) < 1%
Stainless steel cut wire shot of application:
Cleaning: peen-forming cleaning, body.they, non-ferrous alloy, copper alloy, magnesium alloy, zinc alloy die casting cleaning, stainless steel castings peen-forming cleaning, not rust
Steel forgings peen-forming cleaning, forgings body.they castings rust-removing stainless steel plate cleaning |
| Company: |
Shandong Kaitai Shot-Blasting Machinery CO.,LTD
|
| Contact: |
Ms. xiaoqi zhang |
| Address: |
Qingyang |
| Postcode: |
256217 |
| Tel: |
86 0543 8190669 |
| Fax: |
86 0543 4579617 |
| E-mail: |
|
|
|
|
Home
